For me it goes your comment.
Please learn and practice. Good luck ..........
1. Automatic circuit water pump
If you always spill water reservoirs, it's called waste, water everywhere.
Especially if you forget to turn it off, as a result of water in the well could be the time.
I never experienced that before I know her well live in makeshift housing.
Until finally I rack my brain to create high and low water detector. Hopefully this series can be a solution for you.
Figure schemes and circuit:
List of components:
R1 = 100K C1, 2 = 47n
R2 = C3 = 220mf/25v 5K6
R3 = 680 TR1, 2,4,7,8 = FCS9012
R4 = 10 Tr3, 5.6 = FCS9013
R5 = 1K-5 D1 = IN4002
R6 = 270 Transformer 12v 350ma
R7 = 47K ab = PLN
R8 = 47K cd = Pump
R9 = 100K
Relay = 12v DC
ABC = sensor (from iron, stainlis or other)
C1, 2 = 47n
C3 = 220mf/25v
TR1, 2,4,7,8 = FCS9012
Tr3, 5.6 = FCS9013
D1 = IN4002-5
Transformer 12v 350ma
ab = PLN (220v AC input)
cd = Water Pumps
How it works:
Suppose we want the water level in the tank is no higher than point A and point B is lower than the water pump will live alone and if the touching point A pump will die.
A = upper limit of the desired water level
B = lower limit of water
C = is a wire / cable should always touch the water in the paste into the body of the tank (if metal)
Finally, the water tank ga tumapah again .......
Hopefully useful.
